Code Club 4/12/2021 update
The next Club will be on Saturday 4th December 2021 @ Paignton Library. Please contact the library to book.
We will carry on with what we were doing last session, hopefully expand on what we were doing with the Micro:bit
In order to try and support this further, I have created a little connector board to help connect components to the Micro:bit computer.
Board and servo. The issue with the servo normally is that connecting to a Micro:bit with croc clips you need a solid connection. If you remove the connector you are simply left with very thin, multi core wire.
This board just bridges the gap, plug the board connector in to the top.
Then connect the crocodile clip(s) to the other set of connectors
A close up of the connection.
Please note: There is nothing special about doing this, I just soldered this up in the hope it may make things easier at code club. The servo could be swapped out for other sensors, for example a moisture sensor.
Update 2/12/2021
I have also created an LED board to go with the overall set of boards being created.
Links
Tags
#CodeClub,#FreeCodeCamp,#Microbit,#Scratch,#Electronics, #Technology,#Problem,#Solving
| Mastodon | Peertube | Join Mastodon |
AI statement : Consent is NOT granted to use the content of this blog for the purposes of AI training or similar activity. Consent CANNOT be assumed, it has to be granted.
